Ninja 400 Riders Forum banner

1 - 20 of 30 Posts

·
Registered
Joined
·
152 Posts

·
Registered
Joined
·
107 Posts
Not a fan of those narrow turn signals, but otherwise that's a perfect fender eliminator that sits flush against the seat.
 

·
Registered
Joined
·
105 Posts
Just Ordered Mine!

Just got off the TST Industries site and ordered the complete package with the Fender Eliminator, The License Plate Light Kit with the hardware, and the Pod Signal Kit. I was looking at the TST Integrated Light Setup. But I will PASS on this one for now. Because it just flashes the signal on one side or the other and DOES NOT do the 1.2.3. Sequence like the one I had on my Ninja 300... I want to wait for MOTODYNAMICS to put out one of these for the Ninja 400. The one that I had on the Ninja 300 was the 1.2.3. Sequence Integrated Light that Replaced the Stock One and really had a more Impressive and had a much better Stoplight Capability. When you pressed the Brake it would flash about 3 times. And when you activated the Turn Signal it did the ACTUAL 1.2.3. Sequence and would glow from Red to Amber on this Sequence. The New Ford Mustangs did "NOT" have anything one me when I installed this "REALLY COOL" Sequential Stop Light. I really miss my Ninja 300 for this Stoplight. And as SOON AS Motodynamics produces one of these for my 400. I will make my purchase as fast as I can do the Mouse clicks on the order form. Enjoy

 

·
Registered
Joined
·
172 Posts
Oooh, I really like those sequential lights, but I'm inclined to agree that it looks and functions better with the multi sequence. Thanks for sharing, definitely a mod I would be interested in making. Do you remember approximately what the old set up cost you and how involved it was to change?
 

·
Registered
Joined
·
5,494 Posts

·
Registered
Joined
·
105 Posts
TST Fender Eliminator Install

Hey Guys! I just installed my new TST Fender Eliminator and I am "VERY HAPPY" with the results. It was a snap to bob that Ugly Fender Cluster and just could not wait to get it off of the Bike... It did however take me a lot longer to splice in the Resistors into the TST Wiring Harness to "SLOW DOWN" the Flash Rate of the Turning Signals. And they really did Slow down that rate of the Flashers.. I also did the License Plate Light too. The LEDs in this package are sharp, clear and really bright. A really GREAT! deal for $68.00 for the whole package and pretty much a more cheaper option than Yoshurima and Hard Bodies Eliminators.. I will still be waiting on MOTODYNAMICS to see about the 1-2-3- Sequential Tail Light that should come out in a matter of time. Anyway, just wanted to share a few pics on my New Install. Enjoy!
 

Attachments

·
Registered
Joined
·
152 Posts
Discussion Starter #7
Hey Guys! I just installed my new TST Fender Eliminator and I am "VERY HAPPY" with the results. It was a snap to bob that Ugly Fender Cluster and just could not wait to get it off of the Bike... It did however take me a lot longer to splice in the Resistors into the TST Wiring Harness to "SLOW DOWN" the Flash Rate of the Turning Signals. And they really did Slow down that rate of the Flashers.. I also did the License Plate Light too. The LEDs in this package are sharp, clear and really bright. A really GREAT! deal for $68.00 for the whole package and pretty much a more cheaper option than Yoshurima and Hard Bodies Eliminators.. I will still be waiting on MOTODYNAMICS to see about the 1-2-3- Sequential Tail Light that should come out in a matter of time. Anyway, just wanted to share a few pics on my New Install. Enjoy!
Installed mine as well and I agree! I used the stock signals for now as I’m waiting for an integrated tail light. The stock signals take a little engineering to fit to the pod brackets but it will work until I can get rid of them. I just can justify spending the money for a Yoshimura eliminator.
 

·
Registered
Joined
·
237 Posts
tadaa and with a custom license plate boarder, just weighed the stock fender without indicators or screws and its a little over 0.8kgs which is heavy asf
Looks good, my one from Mustard Bikes is on the way so I should hopefully have it by next week.
 

·
Registered
Joined
·
764 Posts
I suppose it is made for US plates, not Australian ones.
nope the plate part was easy just grinded down maybe 0.5cm from each insert on each side of the plate, the problem is taking the connections off the indicators, having to cut the license plate wire and just overall quality of it all, even the license plate light is just stuck on with double sided tape...luckily it sits between the eliminator and license plate but still its meh in terms of quality
 

·
Registered
Joined
·
237 Posts
nope the plate part was easy just grinded down maybe 0.5cm from each insert on each side of the plate, the problem is taking the connections off the indicators, having to cut the license plate wire and just overall quality of it all, even the license plate light is just stuck on with double sided tape...luckily it sits between the eliminator and license plate but still its meh in terms of quality
Hopefully, the Mustard Bikes one will be better............
 

·
Registered
Joined
·
13 Posts
Have you guys seen the universal fender eliminator and a license plate hide gadget device? trydeal have a thing on their website where you can upload a pic of your car or bike and see kinda what the gadget would look like on it. here is a quick one I just did

 

·
Registered
Joined
·
172 Posts
Well that's cool, thanks for sharing. Isn't it illegal to have one of those hiders on your vehicle? I suppose the kind of rider who puts that on their bike, isn't too law abiding anyways aha.
 

·
Registered
Joined
·
13 Posts
Usually not illegal to have on car/bike, just don't use it on a public road because obviously your plate needs to be displayed on any public road or it would be like not having a plate at all.

.
 

·
Registered
Joined
·
377 Posts
nope the plate part was easy just grinded down maybe 0.5cm from each insert on each side of the plate, the problem is taking the connections off the indicators, having to cut the license plate wire and just overall quality of it all, even the license plate light is just stuck on with double sided tape...luckily it sits between the eliminator and license plate but still its meh in terms of quality
I have been working on installing mine and totally agree with you on the quality. Not to mention you cant put the stock signals back on since im waiting on integrated signals to come out.
 

·
Registered
Joined
·
764 Posts
I have been working on installing mine and totally agree with you on the quality. Not to mention you cant put the stock signals back on since im waiting on integrated signals to come out.
im using the stock signals though? you have to by the oem singal install kit from tst which is another stupid thing :/ and yeh quality is lame, I myself could have made a much better kit, example they should have made the lisence light part of the actual fender eliminator itself and included the oem turn signal adaptor included with the eliminator kit, really not impressed but it does the job.
 

·
Registered
Joined
·
5,494 Posts
im using the stock signals though? you have to by the oem singal install kit from tst which is another stupid thing :/ and yeh quality is lame, I myself could have made a much better kit, example they should have made the lisence light part of the actual fender eliminator itself and included the oem turn signal adaptor included with the eliminator kit, really not impressed but it does the job.
That''ll learn ya for not being loyal and buying Australian made! :smile_big:
 
1 - 20 of 30 Posts
Top