I’ve been curious but unable to find the answer on my own, last week I overheard someone talking about their bike having a rev limiter or something on their bike brand new and when they brought it for their first oil change they were supposed to remove it. I did my oil change on my own and wonder if I need to bring it in somewhere? I have noticed that even when I am going top speed I just barely go over 9000 RPM’s on my N400. Thoughts?
StickMasterLuke
FWIW, my tach reads 3% high and my speedo reads 5% high.
See: Is 13200 displayed RPM real? is 11800 real max RPM? | Ninja 400 Riders Forum
I believe 13250 RPM in 2nd gear would be 71 mph, if you have stock tires with close to full tread -- ignoring tire sag, etc.
It's really hard to be sure with stock speedo and tach both being significantly and variably off... If you can get a gps speed at redline in 2nd gear, and if your tires are stock sizes and not significantly worn, you might be able to calibrate your tach using something like gearingcommander.com. Or you can go thru the pain I went thru in the thread above. I assume other folks may have more tach error than I do -- certainly I've heard of folks with more speedo error (10%) than I have (5%). Too bad this stuff isn't just accurate. :-(
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
