Ninja 400 Riders Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Por favor, me pueden ayudar , puse el sensor nuevo de la temperatura y me quedo los errores , de 11 , 12 , 13 , 14 , 31 y 1c
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
Please, can you help me, I put the new temperature sensor and I keep the errors, 11, 12, 13, 14, 31 and 1c
 

·
Registered
Joined
·
122 Posts
Thats a lot of codes all related to different sensors, a harness didnt get plugged in or came unplugged. check all your connections. I would start with the plugs going into the ECU
 

·
Registered
Joined
·
36 Posts
It is also possible the codes are saved from previous issues (like if you tried to start the bike while connectors were disconnected).

Does the bike run? If so, everything might be right again and you might just need to clear the codes.

I use this to clear my codes:


Then you can see what codes, if any, remain and are really current.
 
1 - 5 of 5 Posts
Top