Ninja 400 Riders Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
744 Posts
Discussion Starter #1 (Edited)
Confirmed! The Hindle High Bracket does indeed fit my Two Bros. slip-on. Part #: N418SSBH.

IMG_20180611_170337.jpg

It's stainless steel and painted black. Comes with brake reservoir bracket and all necessary fasteners ($49.95 CAN).
IMG_20180611_134920.jpg

IMG_20180611_151726.jpg

IMG_20180611_151933.jpg

IMG_20180611_152502.jpg

Must lube the band clamp for easier seating
IMG_20180611_161150.jpg

IMG_20180611_152012.jpg

Note: The mounting hole is offset about 10 mm forward from stock position, luckily the band clamp that holds the exhaust to the bracket can slide forward to line up with the fastener hole. Thus you may be successful in using this racing stay if your exhaust utilizes a band clamp to support the muffler. Adverslely, you may need spacers or additional brackets if your exhaust utilizes a fixed mounting bracket.

Good luck.
 

·
Registered
Joined
·
744 Posts
Discussion Starter #3
looks very good, can you edit your post to include a link please so I can order myself one :)
Emud, site is hindle.com, but you gotta contact customer service because that part is not listed separately on their webpage.
 

·
Registered
Joined
·
5,630 Posts
Emud, site is hindle.com, but you gotta contact customer service because that part is not listed separately on their webpage.
I contacted them but they never replied. I like the styling but now that I know it is stainless steel I will go with an aluminium one instead. Gotta keep one step (or kilo) ahead of Emud. Ha ha.
 

·
Registered
Joined
·
5,630 Posts
Not picking on them (Ok, maybe a little) but here is the response I got a week later:

Good morning,

Regretfully our brackets will not work with another manufacturers system.

Thank you for contacting Hindle Exhaust Systems.


:plain:
 
1 - 5 of 5 Posts
Top