Ninja 400 Riders Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 20 Results
  1. Electronics
    So this guy posted this on a facebook page today, he is not replying back on how its all done, but take a look at this! Anyone else ever done this? All he said was swap out 20 pin connectors and swap wiring.
  2. Ninja 400/Z400 General Discussion Forum
    Z400 Top Triple Clamp Conversion Ninja 400 ‘22 OEM parts used: Z400 ‘22 top triple clamp Ninja 400 ‘22 clutch & throttle cables Aftermarket parts used: Zeta offset risers ProTaper Schoolboy High bars ProGrip road grips Re routed stock clutch & throttle cables, starter / kill switch cables. No...
  3. New Member Introduction
    Bought a new 2023 Z400 Kawasaki from Townsville Kawasaki a few weeks ago. Been out to Woodstock and over to Giru a few times and really loved the ride and feel of bike. Darn thing goes like a cut snake. This is the first Kwaka I have owned in my 50 years of riding. Don't know why I waited all...
  4. Kawasaki Ninja 400/Z400 Track And Racers
    Hey, i am new here! So, i was wondering if you actually can convert a Ninja 400 into Z400, i lent the bike to one of my friend, long story short both he and the bike are heavily injured, he is okay now and the bike is sitting for quite a while, it is a bad desicion to lend people your bike but...
  5. Ninja 400/Z400 General Discussion Forum
    Bought some universal bar ends that fit 7/8 but they don’t work as they are made for a hollow bar. So I dug and found the 13042 part number for the part (what is the second number? There are a few like 13042-5007 or 5009 I think) 2022 Kawasaki z400 handle weight 13042 42$ PER bar end!? Anyone...
  6. New Member Introduction
    So hey everyone I’m Justin, I live in south Louisiana… yes like swamp people exactly 😂 So I got a great deal on a 2019 kawi z400 so I had to get it. Fun bike, had it for about 2 months now. Only complaints I have is the clutch and that it gets so hot when you stunt it at low speeds and it’s...
  7. Kawasaki Ninja 400/Z400 Classified Forum
    I have a few sets of velocity stacks for sale that will fit 2018-> Ninja 400 and Z400. They are made of carbon fiber and polycarbonate. I have run a set of these on my bike for about 7,000 miles and 3 or 4 track days. A few others on the forum are also running a set of these stacks on their...
    $75 USD
  8. Parts & Accessories
    I have a stunted ninja 400 and I love the bike. One of the final mods that I can't seem to find any info on is trying to get dirt bars installed. I have some great clip-ons from Impaktek that do the job, but I would still prefer some ProTaper EVOs instead. The triple tree that comes on the 400...
  9. Ninja 400/Z400 General Discussion Forum
    Hi all. I got a good deal on a red 2021 Z400. I'm loving the bike, but not crazy about the color. I was thinking about buying black plastics and swapping the red pieces. So the fender, front and rear seat cowls. Has anyone done this? I'm having trouble picking out the exact part numbers based on...
  10. Ninja 400/Z400 General Discussion Forum
    So I'm sure I know the answer already, but I figured I would at least have a bit of fun while it's on my mind. Outside of the obvious 'just buy a dualsport/ adv/ other bike', has anyone done any mods or work to their Z400 to make it ready for a bit of off road fun? I'm not talking about big...
  11. Ninja 400/Z400 General Discussion Forum
    Hey guys, just wanted to give you a quick look at my z400.
  12. Parts & Accessories
    A quick snap of these 3 pipes side by side at Xtrem Performance , also have them in full systems.
  13. Ninja 400/Z400 General Discussion Forum
    I'm 5'2" and went to test drive a 2019 z400 yesterday and my feet didn't quite sit flat on the ground. The seller said he had an aftermarket seat on it that was higher than the stock, but he didn't keep the stock seat. Other than that the bike seems perfect for me so I've been looking at seats...
  14. Ninja 400/Z400 General Discussion Forum
    ++++++UPDATED: 05/04/2021 - pics added++++++ I thought I would do, what may be helpful for some, a rating of the mods I have done to my Ninja 400. This can help people who are looking at the perspective mods and deciding whether or not they are worth it or beneficial. I will put my former mods...
  15. Ninja 400/Z400 General Discussion Forum
    Hello all, I’m having an issue getting my bike started. I believe there’s some sort of issue in the tip over sensor but I cannot find it to troubleshoot. Help would be appreciate. Thanks! 2020 z400
  16. New Member Introduction
    Hi all, I got my first motorcycle, a used Z400, last week. I'm still getting used to it, taking it slow and practicing throttle control, rev matching, low speed manuvers, and all the basics. The amount of engine braking feels extreme but the only thing I have to compare it to is cars so I guess...
  17. Ninja 400/Z400 General Discussion Forum
    I have recently bought a Z400, my dealer didn't have the Ninja 400, and I got a really good deal on this one. I purchased a battery tender and phone mount, but I am having trouble find placement for the USB-A port coming up to my phone. If anyone has any suggestions to make my bike better I'd...
  18. Kawasaki Ninja 400/Z400 Videos
    HPR Deer Trail, CO 08/24/20 On my Kawasaki Z400
  19. Ninja 400/Z400 General Discussion Forum
    I think I burnt my clutch out at 5,000 miles FML I was on the freeway when i lost power, i was able to get off safely, but ****. Anyone know where I can get a good brand of clutch? should i change anything else while im at it? when should i get my chains and sprocket replaced?
  20. Ninja 400/Z400 General Discussion Forum
    Guys i need help deciding. I just cant decide which one. I live near Fox Powersports which is selling the Ninja 400 black non abs for 3800$ (a **** steal) and the Z400 with abs red for 4200$. My friend rides a CB300R which does look pretty spiffy. Im 6ft and was told i look funny on the CB. But...
1-20 of 20 Results
Top