Ninja 400 Riders Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 14 Results
  1. Norton Motorsports
    Hey all, I recently installed the upgraded clutch kit from Norton. Thought everything was fine until the pull rod snapped on my first ride. Does anyone know what I could've done wrong during the installation that cause this to happen? Trying to figure it out before I put a new one in. Thanks!
  2. Parts & Accessories
    Hi! The clutch on my ninja 400 from 2018 started slipping. I have read that instead of changing the clutch plates you can change the pull rod and bearings to solve the issue. However I don't know if the rod and bearings from for example a ninja from 2021 would work? Anyone know if that would...
  3. Ninja 400/Z400 General Discussion Forum
    Hi all! I’m a new rider that is looking at their first bike! I sat on some last weekend, I loved the Z400! Felt good to sit on, plus I’ve always been fond of Kawasaki. Ive been doing research and I see a lot of clutch issues posts everywhere I look. Sounds like they upgraded stuff like the push...
  4. What Did You Do to Your Ninja 400/Z400 Today?
    Hi all, so yesterday I put some new short adjustable levers on the bike. Brake side was all OK, however when putting the clutch lever in to align with the bolt hole the little silver pin snapped. The pin that goes in and out when the lever is pulled or released. What's the purpose of the pin...
  5. Sold SOLD

    Ninja 400/Z400 Parts
    $80 USD
  6. Engine and Technical Discussion
    Backstory: (skip to tldr if not interested) I was riding my ninja 400 at around highway speeds, ~75mph and a car was riding my ass hard so I gave it some throttle and suddenly it felt as though I was in neutral as the engine started racing and my speed wasn’t climbing but instead lowering. I...
  7. Engine and Technical Discussion
    Hey guys! I have a brand new 2021 ninja 400 that I’m still breaking in. It’s been doing really really well, but it started doing some thing funny today. Normally, if I give it about 1/8 throttle into my first gear it will go into gear and takeoff. Today, I have to give it much more throttle in...
  8. Ninja 400/Z400 General Discussion Forum
    I’m about to order some heavy duty clutch plates cause my clutch is almost burnt. Curious if I should go ahead and replace the steel plates as well? Or do they not wear out as fast. Also, noticed on nortonmotosports they have 2 options for the clutch plates, normal and a ‘track only’ option...
  9. Ninja 400/Z400 General Discussion Forum
    Hello All, I'm looking at buying a stock 2020 Ninja 400 with ABS from a private retailer off kijiji. There are just under 4000km on it. The colour is red. I live in Ontario, Canada. The asking price is $5300 - which I think is too high - any idea what I should settle at? Also, another query...
  10. Ninja 400/Z400 General Discussion Forum
    I've recently purchased a new 2020 Ninja 400. Last weekend I installed some frame sliders and a slip on exhaust. I started her up afterwards in neutral with the kickstand down a couple of times, checked all indicators and lights - they were/are working. Today I went to turn on the bike. It was...
  11. Ninja 400/Z400 General Discussion Forum
    Hey , i going to change the plates but in my country dont sell the original plates or others , i want to now the measurements to search compatibility plates of others bikes for my ninja 400 , and the measurements of the springs , please help me , and thanks you
  12. Ninja 400 Complaints, Issues And Problems
    I was a beginner rider. Didn't know how to rev match properly, tried to do wheelies and rev bombed here and there(maybe once a week). Then my clutch gave out after 6 months(3000 miles) of use at around 6300(im second owner) miles. The head mechanic told me it is normal and that it happens to...
  13. Ninja 400/Z400 General Discussion Forum
    I think I burnt my clutch out at 5,000 miles FML I was on the freeway when i lost power, i was able to get off safely, but ****. Anyone know where I can get a good brand of clutch? should i change anything else while im at it? when should i get my chains and sprocket replaced?
  14. Ninja 400 Complaints, Issues And Problems
    Hi i recently bought a 2019 ninja 400 abs and i had to replace the clutch because i burned it out doing burnouts lmao. but i replaed it yesterday and towards the end after i installed everything i believe correctly and back where i took it from. My clutch line seems to be longer, has more slack...
1-14 of 14 Results